Ultra Guard Waterbased Polyurethane is the ideal protective varnish designed to enhance and safeguard your interior surfaces with exceptional durability and ease of use. Non-yellowing and reinforced with silica for increased resistance to abrasion, ensuring your furniture, worktables, wood floors, and other surfaces look their best for years.
Versatile Application: Suitable for interior water-based paints and all types of bare wood.
Enhances Colour: While applied goes on whitish and dries transparent, enhancing both light and dark colours.
Available in Flat or Satin
Application Instructions:
-
Prepare the Surface:
-
Painted Surfaces: Clean and degrease with TSP Alternative. Wait 24-48 hours after painting before applying.
-
Bare Wood: Sand smooth with 120-grit sandpaper, ensuring it's free from wax and contaminants. Remove dust before application.
-
Mixing:
- Mix thoroughly with a stick and wait 20 minutes before applying.
-
Application:
- Use a synthetic bristle brush or a microfiber roller. Sand lightly with 220-grit sandpaper between coats.
Number of Coats:
-
Painted Surfaces: 2 coats recommended.
-
Bare Wood & Non-Sealing Stains: 3 coats for optimal protection.
Drying Times:
-
Between Coats: Allow 3 to 48 hours. After 48 hours, lightly sand before the next coat.
-
Bare Wood: Apply the second coat after 3 hours without sanding.
-
Before Sanding: Wait 6 to 8 hours before sanding for a smooth finish.
| Application Tool |
Brush or Staalmeester roller |
| Location |
Interior |
| Re-coat Time |
3-48 hours* |
|
|
| Top Coat |
No additional top coat is required.- this is made strong enough for floors and table tops |
| Clean Up |
Odourless Solvent - can also be used to thin the coats and create a faster drying/cure time. |
| Coverage |
6m2 — 65ft2 per can |
| Finish/Sheen |
Flat or Satin |
| Recommended Uses |
Virtually any surface with minimal prep required |
| Can Be Applied To |
It can be applied on interior water-based paints and all types of bare wood. It is suitable for furniture, worktables, wood floors and other interior surfaces. |
| Can Be Painted Over |
After 10 days curing, with a clean and scuff sand. Test first to ensure adhesion prior to tackling your full project. |
| How to Prep |
Prior to application all surfaces should be free of wax, varnish or other types of contaminants. Always remove dust after sanding prior to application. |
| Cure Time |
7-10 Days |
| Maintenance/ Cleaning |
Gentle cleaners |
*After 48 hours, a light sanding with 220 grit is necessary before applying another coat.
